Bobster
.30-06
Picked up a Choate +3 magazine extension for my SA-20 Turkey Thug this week. Got it online directly from Choate. Part number 02-04-43. Cost just under $60 including shipping. They shipped quickly via UPS but failed to provide a tracking number so UPS left me a yellow notice one day but I got it the next--NBD...
Kit is similar to a kit I installed in a Remmy Wingster although this kit required more mods to the tube than the Remmy. Includes mag extension, follower, longer spring and tube clamp as shown.
First step with an unloaded gun is to remove the magazine tube cap, foreend and barrel. Pic shows the tube with round limiting "dowel" removed. There is an "oval" metal backer behind the spring cup that is held in place by a lip at the end of the mag tube. To get the backer out the spring cup is pressed in with the larger screwdriver and backer manipulated out with the small screw driver.
Kit is similar to a kit I installed in a Remmy Wingster although this kit required more mods to the tube than the Remmy. Includes mag extension, follower, longer spring and tube clamp as shown.
First step with an unloaded gun is to remove the magazine tube cap, foreend and barrel. Pic shows the tube with round limiting "dowel" removed. There is an "oval" metal backer behind the spring cup that is held in place by a lip at the end of the mag tube. To get the backer out the spring cup is pressed in with the larger screwdriver and backer manipulated out with the small screw driver.