Search results

Thanks Rob72 for the suggestion. I was able to remove the nut from the tube with the help of a torch, so now ill try some more chamfer and polishing and see if that does the trick.

chamfered and polished the mag tube but the junction for the extention tube is inaccessible to use calipers for a measurement as the nut on the extension tube won't come off. I don't know if mine was pressed on the tube, but it won't budge. Also, when I slide the steel follower down the empty...

I have a 930 turkey 24" model and put a nordic +5 extension w/clamp and a new Wolff spring. I read some where that when tightening the extension tube to the mag tube to leave it slightly loose to help ensure that the follower and spring don't bind at the junction. If that is correct, should...