J joe d Copper BB Feb 17, 2013 #1 have a new 715t flat top ,want to move the fix stock back to fit my frame then repin it.any help out there
have a new 715t flat top ,want to move the fix stock back to fit my frame then repin it.any help out there
S schriscoe Copper BB Feb 17, 2013 #2 There is a hole through the current pin in your fixed stock. I used a drill to open up around the pin so I could get to that pin hole. Then you simply pull out the pin and use something like a key ring to make your own adjustable stock.
There is a hole through the current pin in your fixed stock. I used a drill to open up around the pin so I could get to that pin hole. Then you simply pull out the pin and use something like a key ring to make your own adjustable stock.
S schriscoe Copper BB Feb 20, 2013 #4 Just got my Tapco adjustable stock shell. Slid it right on and voila, I now have a slick looking adjustable stock 715!
Just got my Tapco adjustable stock shell. Slid it right on and voila, I now have a slick looking adjustable stock 715!