Marine Tuf-Cloth
http://www.sentrysolutions.com/mm5/merc ... ode=MARINE
Marine Tuf-Cloth was developed for U.S. Navy SEALS, based upon the successful lint-free, long-lasting, oil-free Tuf-Cloth, the replacement for oil and silicone rags for knives, tools, and firearms. Sentry Solution’s proprietary formula of non-toxic, dry-film corrosion inhibitors and lubricants provides a fast-drying, water-displacing, micro-bonding crystal barrier against rust, friction and wear. The Marine Tuf-Cloth is formulated with additional anti-corrosive ingredients. These special ingredients enhance protection of firearms, fishing tackle, dive knives and gear, boat and trailer accessories against the highly corrosive effects of saltwater and high humidity. Marine Tuf-Cloth also offers superb protection for gear that is stowed away long-term, keeping it rust-free and out-of-storage ready for your next adventure.
How it works
Product Name: Marine Tuf-Cloth
Product Code: 91020
Wiping with MARINE TUF-CLOTH gives you cleaning, rust protection and lubrication. Pure mineral spirits is the fast drying carrier for the active ingredients, so MARINE TUF-CLOTH cleans as it transfers the lubricants and protectants to all surfaces of your gear for 100% protection. It evaporates, and Sentrys proprietary ingredients bond to the surface; this bonding assures long-lasting effectiveness. MARINE TUF-CLOTHs waterproof protection will not wash off or thicken in the cold (even down to -40°F/-40°C). It is dry to the touch so will not attract dirt like oil-based products, nor does it leave a slippery film like silicone. It is safe to use on wood and most plastics. Based on the original TUF-CLOTH formula with additional oil-free corrosion inhibitors not found in TUF-CLOTH, to enhance protection in extreme conditions and saltwater.
MARINE TUF-CLOTH is user-adjustable; either by drying in air or adding pure mineral spirits. A wetter cloth applies a thicker shield of protection that dries more slowly. The excess can be buffed off after it is dry without compromising performance. Use MARINE TUF-CLOTH to protect equipment, firearms, boat parts, knives, wood and all metal components. It maintains its effectiveness even when it is wet with water, and it will not harm most plastics.
Directions for use
Product Name: Marine Tuf-Cloth
Product Code: 91020
If surfaces to be protected are very dirty, grimy or oily, best performance will be achieved if the surface is cleaned before using MARINE TUF-CLOTH. This helps bonding of the active ingredients and prevents contamination of your TUF-CLOTH.
Clean surfaces well.
Rub surfaces firmly with MARINE TUF-CLOTH.
Drying time depends on thickness of coating/dampness of cloth. If cloth dries out add TUF-GLIDE or pure odorless mineral spirits (not turpentine) to restore its original feel. If item is exposed to saltwater: rinse with fresh water, dry and re-wipe with MARINE TUF-CLOTH. Return cloth to its special vapor-barrier pouch and seal tightly for longer life.
Use frequently if item is exposed to saltwater, wear or stored outside.
For hard-to-reach areas use with Sentrys Solutions Award Winning TUF-GLIDE.
Contains mineral spirits. Wash hands after using. Keep away from children.
Gear Care Kit™ Field Grade Tin
http://www.sentrysolutions.com/mm5/merc ... e=FIREARMS
A unique product for complete knife and tool care. Award winning TUF-CLOTH and TUF-GLIDE, conveniently packaged in a handy, rugged, compact tin with GATCO Super Micro X Ceramic Four-Rod Sharpener and easy to use cleaning tools. A great combination of revolutionary lubrication, protection and versatility. TUF Products' non-toxic bonded protection and the ultimate compact sharpener for knives, broadheads and even serrated edges.
How it works
Product Name: Gear Care Kit™ Field Grade Tin
Product Code: 91202
Gear Care Kit provides users with the latest in dry lubrication and corrosion protection technology to enhance performance of knives and tools as it cleans and protects. Sentry Solutions products proprietary oil-free lubricants and corrosion inhibitors to smooth and protect metal surfaces at the microscopic level thus preventing gear from becoming the dust magnets as seen with oil products.
Directions for use
Product Name: Gear Care Kit™ Field Grade Tin
Product Code: 91202
To Clean and Protect...
To clean moving parts and hard to reach areas apply TUF-GLIDE sparingly. Work action to ensure complete coverage. Use TUF-CLOTH to wipe off any excess TUF-GLIDE. Thoroughly wipe all surfaces with TUF-CLOTH for maximum cleaning and protection. When surface dries you may buff off excess to enhance appearance.
To Sharpen... Follow the instructions included with the sharpener.
To Lubricate and Protect...
Apply TUF-GLIDE to all moving parts and hard to reach areas. Work mechanism to ensure complete coverage. Wipe off excess with TUF-CLOTH.
For refills and replacements please contact your local retailer or contact Sentry Solutions Ltd. and GATCO.
http://www.sentrysolutions.com/mm5/merc ... ode=MARINE
Marine Tuf-Cloth was developed for U.S. Navy SEALS, based upon the successful lint-free, long-lasting, oil-free Tuf-Cloth, the replacement for oil and silicone rags for knives, tools, and firearms. Sentry Solution’s proprietary formula of non-toxic, dry-film corrosion inhibitors and lubricants provides a fast-drying, water-displacing, micro-bonding crystal barrier against rust, friction and wear. The Marine Tuf-Cloth is formulated with additional anti-corrosive ingredients. These special ingredients enhance protection of firearms, fishing tackle, dive knives and gear, boat and trailer accessories against the highly corrosive effects of saltwater and high humidity. Marine Tuf-Cloth also offers superb protection for gear that is stowed away long-term, keeping it rust-free and out-of-storage ready for your next adventure.
How it works
Product Name: Marine Tuf-Cloth
Product Code: 91020
Wiping with MARINE TUF-CLOTH gives you cleaning, rust protection and lubrication. Pure mineral spirits is the fast drying carrier for the active ingredients, so MARINE TUF-CLOTH cleans as it transfers the lubricants and protectants to all surfaces of your gear for 100% protection. It evaporates, and Sentrys proprietary ingredients bond to the surface; this bonding assures long-lasting effectiveness. MARINE TUF-CLOTHs waterproof protection will not wash off or thicken in the cold (even down to -40°F/-40°C). It is dry to the touch so will not attract dirt like oil-based products, nor does it leave a slippery film like silicone. It is safe to use on wood and most plastics. Based on the original TUF-CLOTH formula with additional oil-free corrosion inhibitors not found in TUF-CLOTH, to enhance protection in extreme conditions and saltwater.
MARINE TUF-CLOTH is user-adjustable; either by drying in air or adding pure mineral spirits. A wetter cloth applies a thicker shield of protection that dries more slowly. The excess can be buffed off after it is dry without compromising performance. Use MARINE TUF-CLOTH to protect equipment, firearms, boat parts, knives, wood and all metal components. It maintains its effectiveness even when it is wet with water, and it will not harm most plastics.
Directions for use
Product Name: Marine Tuf-Cloth
Product Code: 91020
If surfaces to be protected are very dirty, grimy or oily, best performance will be achieved if the surface is cleaned before using MARINE TUF-CLOTH. This helps bonding of the active ingredients and prevents contamination of your TUF-CLOTH.
Clean surfaces well.
Rub surfaces firmly with MARINE TUF-CLOTH.
Drying time depends on thickness of coating/dampness of cloth. If cloth dries out add TUF-GLIDE or pure odorless mineral spirits (not turpentine) to restore its original feel. If item is exposed to saltwater: rinse with fresh water, dry and re-wipe with MARINE TUF-CLOTH. Return cloth to its special vapor-barrier pouch and seal tightly for longer life.
Use frequently if item is exposed to saltwater, wear or stored outside.
For hard-to-reach areas use with Sentrys Solutions Award Winning TUF-GLIDE.
Contains mineral spirits. Wash hands after using. Keep away from children.
Gear Care Kit™ Field Grade Tin
http://www.sentrysolutions.com/mm5/merc ... e=FIREARMS
A unique product for complete knife and tool care. Award winning TUF-CLOTH and TUF-GLIDE, conveniently packaged in a handy, rugged, compact tin with GATCO Super Micro X Ceramic Four-Rod Sharpener and easy to use cleaning tools. A great combination of revolutionary lubrication, protection and versatility. TUF Products' non-toxic bonded protection and the ultimate compact sharpener for knives, broadheads and even serrated edges.
How it works
Product Name: Gear Care Kit™ Field Grade Tin
Product Code: 91202
Gear Care Kit provides users with the latest in dry lubrication and corrosion protection technology to enhance performance of knives and tools as it cleans and protects. Sentry Solutions products proprietary oil-free lubricants and corrosion inhibitors to smooth and protect metal surfaces at the microscopic level thus preventing gear from becoming the dust magnets as seen with oil products.
Directions for use
Product Name: Gear Care Kit™ Field Grade Tin
Product Code: 91202
To Clean and Protect...
To clean moving parts and hard to reach areas apply TUF-GLIDE sparingly. Work action to ensure complete coverage. Use TUF-CLOTH to wipe off any excess TUF-GLIDE. Thoroughly wipe all surfaces with TUF-CLOTH for maximum cleaning and protection. When surface dries you may buff off excess to enhance appearance.
To Sharpen... Follow the instructions included with the sharpener.
To Lubricate and Protect...
Apply TUF-GLIDE to all moving parts and hard to reach areas. Work mechanism to ensure complete coverage. Wipe off excess with TUF-CLOTH.
For refills and replacements please contact your local retailer or contact Sentry Solutions Ltd. and GATCO.
