Torque settings

[Highlander]

Hi guys

Wondering if anyone has the factory torque settings for a MVP patrol 308 action and top rail screws.

I picked it up a couple weeks ago but its been shipped around the world and was delivered to me in a cardboard Ruger box with nothing but the bolt, rifle and magazine.

Thanks in advance
Highlander

 

[wood chucker]

Factory don't publish those values. Try snug plus with some blue lock tight on the scope base screws and you might torque the action screws somewhere between 30 and 50 inch pounds on the action screws. Start at the low and work up in 5 inch pound increments shooting a few groups for size at every stop until i hit max is what i do..