Huge Salad Fork
Copper BB
Hello, this is my first post here. I inherited my dad's Mossberg 190DA 16 gauge bolt action shotgun and would like to start using this gun to hunt deer. I am pretty good with doing my own gun maintenance and have been taking this gun apart and seeing its workings. The one thing I cannot for the life of me figure out is how to take the bolt apart. I have searched everywhere and can't find any solid information on this.
I have removed it from the gun and I find that it is two cylinders as well as a trigger assembly inside. I can rotate the cylinders relative to each other, all the way around, and I can also manually pull back and rotate the trigger assembly (takes some umph as it's sprung). I see no pins or screws, only a small ball-bearing in one place. So does anyone know the trick? The more details the better.
Also I believe that 185s and one other (perhaps 195/193) are pretty much the same. Let me know if you know how to do it on one of these. Thanks ahead of time.
I have removed it from the gun and I find that it is two cylinders as well as a trigger assembly inside. I can rotate the cylinders relative to each other, all the way around, and I can also manually pull back and rotate the trigger assembly (takes some umph as it's sprung). I see no pins or screws, only a small ball-bearing in one place. So does anyone know the trick? The more details the better.
Also I believe that 185s and one other (perhaps 195/193) are pretty much the same. Let me know if you know how to do it on one of these. Thanks ahead of time.