Bobster .30-06 Mar 10, 2019 #2 Probably not--the mag tube may be too tight and receiver may be proud of the buttstock. BUT, I'm sure there is someone here with a 20ga that would be willing to trade as 20ga furniture is a little more rare than 12ga. BTW, Welcome Aboard!
Probably not--the mag tube may be too tight and receiver may be proud of the buttstock. BUT, I'm sure there is someone here with a 20ga that would be willing to trade as 20ga furniture is a little more rare than 12ga. BTW, Welcome Aboard!
MikeD I'm Your Huckleberry Staff member Administrator Global Moderator "Philanthropist" Mar 11, 2019 #3 Stock will fit but there will be a slight step at the receiver as the 20g is a hair narrower than the 12g. The forends are not interchangeable. You may be able to use a 12G forend on a 20G if you fabricate some type of shim but a 20G will not fit a 12G.
Stock will fit but there will be a slight step at the receiver as the 20g is a hair narrower than the 12g. The forends are not interchangeable. You may be able to use a 12G forend on a 20G if you fabricate some type of shim but a 20G will not fit a 12G.
sixbennetts .270 WIN Mar 12, 2019 #4 Bet you could add a full length piece of heat-shrink tubing to the action tube to take up the slack.