Since this will be used 50yds and in mostly for squirrel/rabbit gun, sometimes in heavy brush, and plinking rats at the dump, stock not required for me.
nitesite said:Since this will be used 50yds and in mostly for squirrel/rabbit gun, sometimes in heavy brush, and plinking rats at the dump, stock not required for me.
So you're running a scope without a shoulder stock and instead using forward sling tension? I think that could possibly work using a long eye relief low-powered handgun/scout scope (1.5x ~ 2.5x) with just a little bit of practice for close in shooting. So I think your 3x9 rifle scope will present some challenges with eye relief when your great-looking modded 715T gets into the field or heavy brush, even when cranked down to the minimum 3X (three power magnification)
Honestly, I don't know why anybody wants to hunt squirrel or any other small game at ranges approaching fifty yards. You definitely have got the right idea as far as effective ranges.
You should be okay with what you are trying to accomplish. Might have to go back to the RDS. Good shooting!
rootbrain said:Yep, I'm happy so far. Dremmel work needs a little "clean up". just sanding and leveling off a it more. But I've always hated that damn carrying handle, LOL. My Colt AR had the removable one, have wanted this off since purchase.
I also cut off the front sight. Going to get folding front sight and rear ghost for when I want to use irons. The strap on the back is connected to the pin/screw that held the adjustable stock (also gone as you see). Arm goes through the loop and the rifle hangs to my strong side. Raise it up, pushing the rifle forward (like leaning back into the strap). I might get a bit longer strap, this one is a bit short for me at 6'1". We all know recoil and muzzle rise are pretty much non-existent with this thing. Since this will be used 50yds and in mostly for squirrel/rabbit gun, sometimes in heavy brush, and plinking rats at the dump, stock not required for me. The RDS will be the key. Mine is a pretty good $60 (something) RDS (Walther PS-22). Works like a charm on other guns, so if dialed in, should be GTG. Certainly NOT going to put a $400+ Aimpoint or EOTech RDS on a $200 gun.
Here it is, the basic. Will continue along, got 3 of the 25 round mags and use the YouTube on getting them "stable". Haven't been to the range today, might have to put that off a few days, busy the next couple and then snow coming for the next couple.
BowerR64 said:rootbrain said:Yep, I'm happy so far. Dremmel work needs a little "clean up". just sanding and leveling off a it more. But I've always hated that damn carrying handle, LOL. My Colt AR had the removable one, have wanted this off since purchase.
I also cut off the front sight. Going to get folding front sight and rear ghost for when I want to use irons. The strap on the back is connected to the pin/screw that held the adjustable stock (also gone as you see). Arm goes through the loop and the rifle hangs to my strong side. Raise it up, pushing the rifle forward (like leaning back into the strap). I might get a bit longer strap, this one is a bit short for me at 6'1". We all know recoil and muzzle rise are pretty much non-existent with this thing. Since this will be used 50yds and in mostly for squirrel/rabbit gun, sometimes in heavy brush, and plinking rats at the dump, stock not required for me. The RDS will be the key. Mine is a pretty good $60 (something) RDS (Walther PS-22). Works like a charm on other guns, so if dialed in, should be GTG. Certainly NOT going to put a $400+ Aimpoint or EOTech RDS on a $200 gun.
Here it is, the basic. Will continue along, got 3 of the 25 round mags and use the YouTube on getting them "stable". Haven't been to the range today, might have to put that off a few days, busy the next couple and then snow coming for the next couple.
Dude one more cut and you will have the same gun i have. same price too $238. +$200= same price i paid. :roll:
ronaldosanchez said:I just found a mossberg tactical with the handle for 200 dollars CDN used.
The deal is too good to pass up, however, has anybody had an experience converting their carry handle 715 to a flat top? it seems like i could just hacksaw it off and use ABS glue to attach a picatinny rail?
divemasterjt said:Ready for optics and shipment of barrel shroud. Will post pictures when they are mounted.