romanlynch
Copper BB
I'm new to the shotgun world and have a question. I bought a 600at (12ga) and I'm not sure if this is normal or not. When I load the shells (2 3/4) I have to push that button on the left side of the trigger assembly to unlock the slide and load a shell into the chamber and then again after each shot. I've shot an 870 once and once it had a shell in the chamber I just had to rack the slide after each shot.
I took the 600at apart and cleaned it good (filthy thing!) and I see the bar that it's catching on. In the pic the bar is sitting on top of the bolt(?) in the bottom right corner. If I pull the slide back far enough the bar locks the bolt in place and I have to push that button to release it. Is that normal or is something worn/bent?
I took the 600at apart and cleaned it good (filthy thing!) and I see the bar that it's catching on. In the pic the bar is sitting on top of the bolt(?) in the bottom right corner. If I pull the slide back far enough the bar locks the bolt in place and I have to push that button to release it. Is that normal or is something worn/bent?