Tyler Arnet .22LR Oct 14, 2014 #61 I know this is an older thread, but has anyone had any issues developed from this mod?
Shoten Hatebreed Pit Crew Sponsor Oct 14, 2014 #62 As long as you swap both the barrel and magazine tube, they work fine. But DO NOT shoot 3.5" rounds out of it. The reciever will still cycle them, but the barrel will not like it, and may be ruined afterwards, or blow up.
As long as you swap both the barrel and magazine tube, they work fine. But DO NOT shoot 3.5" rounds out of it. The reciever will still cycle them, but the barrel will not like it, and may be ruined afterwards, or blow up.
Tyler Arnet .22LR Oct 14, 2014 #63 Thanks. I just picked up my 535 this evening and plan on doing this relatively soon. I'll be sure to share my experiences as you all have.
Thanks. I just picked up my 535 this evening and plan on doing this relatively soon. I'll be sure to share my experiences as you all have.
MikeD I'm Your Huckleberry Staff member Administrator Global Moderator "Philanthropist" Oct 14, 2014 #64 I performed this swap on my 835 and it has worked flawless. As was mentioned just make sure you only use rounds the installed barrel can handle. Sent from my Barnett Raptor using alien technology
I performed this swap on my 835 and it has worked flawless. As was mentioned just make sure you only use rounds the installed barrel can handle. Sent from my Barnett Raptor using alien technology