Re: Replacing Safety
Well, as you have probably figured out, unless you get the detent ball free, your stuck. You might try a small pick. Just do it over a large light colored towel, that way when the detent ball does come free, if it falls, you have a better chance of finding it. If it falls into the receiver, you will more than likely have to detail strip the receiver unless you can shake it free. You need the detent ball on the spring for the saftey to work correctly. Unfortunately, there is not much you can do at this point but just work at it until it is fixed, or take it to a qualified gunsmith. Sorry I can't be of more help.