Called Havlin NO help there. Looked at the PDF you sent no help either. I know how to disassemble but so far know one can tell me how to get a broken plunger out of it's hole. Thanks, AnywayThis might help,,,,
http://stevespages.com/pdf/mossberg_390ka.pdf
You also could give Havlin a call (636) 937-6401
Sound good I'll try it. now to find a 1/64th bit.Small left handed drill bit? Easy out? Small pick?
Well so far so good, replaced the index plunger and spring without to much problem. Used a 3/32 milling bit on my Dremel tool. It grabbed the plunger and unstuck it. Used tweezers to pull it out. It seems it was not broken, used a pick to remove the spring which was the problem. It was to short, most likely someone attempt to repair. Installed new spring and plunger, Bolt is in functioning order. now just have to wait on 2 back ordered parts from Havlin. A safety block and the 2 round 16ga magazine.Sounds good.
Keep us posted on the restoration.
I won't forget. I just don't like taking pics till it's done a ready for action.Glad you got that plunger fixed.
Don't for the pics.
Hope this is OK. Just finished work on a old Stevens model 51. Here are some pix.I won't forget. I just don't like taking pics till it's done a ready for action.
Tried to post some pix. the site came back with an error. said to large of a file. That's the smallest setting on my camera. oh, well.I won't forget. I just don't like taking pics till it's done a ready for action.
Any suggestions?Pics didn't load????
Home computer and yes I clicked upload a file.Are you on a computer or phone? I've heard some people have problems uploading from a phone.
You are clicking "upload a file" ?
Home computer and did lick upload a file.Are you on a computer or phone? I've heard some people have problems uploading from a phone.
You are clicking "upload a file" ?
Yes, it does all that, then an error window comes up and says the file is to large and does not produce a picture.When you click on upload a file, does it open a window on your pc and you double click on the pic you want to upload?