hombre243
.30-06
I am not positive but i don't think so on the mod, bushing style is all I ever heard .....I think if there was an easy mod they wouldn't be able to sell the neck sizer
That would suck to stick a round, I think as you reach the end of the cases life that might be an issue, might not. As you use the brass , it hardens, loses memory and might fail to release from the chamber.
Usually the brass cracks before that and you cull it with full length
One way to save brass is to anneal it. The shoulder is where most of the problems occur. Annealing softens brittle brass and lengthens case life expectancy. You Tube vids illustrate how it is done. One guy uses a cordless drill, a spark plug socket or whatever fits best to the size case head you have, and an extension that will fit the socket and the drill. The process involves turning the case at slow rpms and heating with a bernz o matic or similar torch, to the point just at the temp where the color changes to red, then dumping the case into water. It is supposed to extend the case life quite a bit.