Championchad said:Ryan 1904- How did you end up getting the muzzle brake off. I'm trying to remove mine and its a monster.
Championchad said:Hey Mossberger's! I was able to get the Muzzle Brake of and fake suppressor on my 715t Flat Top. It's a 2 man job unless you have a vise. 1st I field stripped the gun to the receiver / barrel. My buddy and I wrapped a piece of rubber around the barrel followed by a wrench. We sprayed some lubricant by the nut and washer & heated it up with a heat gun (which may have made no diff). While I held the wrench wrapped around the barrel he used a wrench to loosen the Muzzle Brake.
All it takes is a 1/4 turn and it twists off from there. It's cake once you get an extra hand involved or a vise.
LakinsDaddy said:ok so ive been reading on here and some other places that the ruger 10/22 flash hider works on the carry handle non threaded version. is this true? if it is true are there any major mods to make it fit? i have found the long flash hider that i want but dont want to waste money if it wont fit right. it says it slips on and is held on by a set screw.
KDF-TX said:LakinsDaddy said:ok so ive been reading on here and some other places that the ruger 10/22 flash hider works on the carry handle non threaded version. is this true? if it is true are there any major mods to make it fit? i have found the long flash hider that i want but dont want to waste money if it wont fit right. it says it slips on and is held on by a set screw.
They call it a "muzzle brake" but I think this may be what your're looking for. I ordered mine from Amazon 'cause I was placing an order anyway.
The NcStar Ruger 10/22 Short Muzzle Brake fits tight. I had to knock it on with a leather hammer. It does have a set screw and allen wrench but neither fit very well. I'm going to replace them soon.
KDF-TX said:They call it a "muzzle brake" but I think this may be what your're looking for. I ordered mine from Amazon 'cause I was placing an order anyway.
The NcStar Ruger 10/22 Short Muzzle Brake fits tight. I had to knock it on with a leather hammer. It does have a set screw and allen wrench but neither fit very well. I'm going to replace them soon.
LakinsDaddy said:KDF-TX said:They call it a "muzzle brake" but I think this may be what your're looking for. I ordered mine from Amazon 'cause I was placing an order anyway.
The NcStar Ruger 10/22 Short Muzzle Brake fits tight. I had to knock it on with a leather hammer. It does have a set screw and allen wrench but neither fit very well. I'm going to replace them soon.
so i could order one of them off ebay and it will work then correct? if it fits tight then there should be no problem with it falling off especially if i get a better set screw correct?