Hi everyone, simon for S&J hardware,we don't get on this sight much, as it has been noted we are a small shop, an we try to make high quality products.
What has happened here is a simple case of making a products too well...
Let me explain.
This new batch of mag tubes, we made on a new machine, as well as it being much faster we managed to tighten up a few of the specs
we have a handful of Mossberg shot guns in the shop and we test load each mag tube before its packaged.
It seems that Mossberg have a very loose spec on the mag tube, as i say we talked with them and we also went to a few gun sops and tried on our mag tubes, it was hit and miss as to weather the mag tube will screw down all the way, it seems we need to allow more lead on last thread to allow for mossbergs loose/ no spec.
Again this is not happening to all of them.
we are offering returns on anyone that has one of the new units that is out the 1 /16th on an inch.
the tubes are about 1/16 the an 1/8th long, im not sure what happen but again can be returned if that an issue.
we are also going to bore and ream the mag tube another 100/125thou deaper to allow for non standard leanth 2 3/4 12ga shells
Last thing, we really ,really need more US dealers, we had a bunch a few years ago but they all went under and closed.
60% of our sales last year went to the US.
We can service our customers much faster if we had a few US dealers willing to stock our bigger products.
1 you save on shipping, 2 you get it faster.
we offer goo mark up for a very high quality product line, that being used by police and Mil all over the world, that not just and "internet story" our Mossberg , Remington and fabarm products and seen action is Astan, Iraq, Jordan mexico. in use buy 100,s of police agancys all over the world, as we don't have many export restrictions o n our products , being made in Canada.
we always look forward to feedback .
Our main goal is to make the best in class of these product, stuff you can best you life on. be it a 2 legged or 4 legged problem.
Last thing is the follower
we are out of the Mossberg follower, the are .900 and the Remington ones are .910 aproxx
Anyone that can hook us up with a US dealer willing to "stock" some or all of our items, please have them contact us by email and we will sent up a call
sales@sjhardware.com
You don't need to be an FFL to sell our products, we are just looking for a few good people that Can get our product out to US customers faster.
all of our products come in full retail packaging
Thanks
Simon Beeson
Partner
S&J Hardware Inc
sales@sjhardware.com
www.sjhardware.com