JJC said:Some upgrades....
Magpul ACS stock and 10/22 muzzle brake.
...and I'm still not done yet. :mrgreen:
EYEMAN said:Wanting to add a muzzle break to my Mossberg Tactical 22. My question is: Will the break for a Ruger 10/22 fit the barrel of the Mossberg Tactical 22? Is the barrel diameter the same? Thanks for any info!!
bellofello said:How are you guys fitting AR stocks on to your mossbergs? I'd love to put one on mine? Last time I checked mine doesn't have a faux buffer tube... I guess I'll have to check again.
Also a cheap accuracy upgrade would be to shim the receiver in to the plastic halves to try to eliminate some play. I don't think this has been mentioned yet...
I'm kind of dissapointed that there isn't any aftermarket support for action parts, trigger group, etc... I check around every now and then to see if anything new has been developed, but nothing yet.
bellofello said:Holy crap, so it is lol.
I've been so pissed off not being able to ship the ATI in to Canada
Thanks! Time to hit up the eBay airsoft section
Thanks a million for the advice on the fixed stock. I knew there had to be a way to use it as an adjustable seeing you can see the adjustment holes on the bottom of the stock.... You just saved me like $100 buying a aftermarket one.... Its not that easy to do living in New York area either. Thanks againbellofello said:Here's a quick and easy, free, method of converting your non-adjustable stock in to an adjustable one (if local laws permit such actions of course)
-Get a small pick (I used a cork screw snapped one), or any small poking device. And some wire, fairly small gauge.
-pick at that pin on the bottom side of the stock untill you grab the hole that is burried in the stock.
- pull it out (there is spring tension)
-insert a 3"ish piece of wire and make a loop through the hole in the adjustment pin. See pic
Pull down on loop, adjust, let go.
It's ugly but it works.
JJC said:Rossignol said:JJC said:I'd like to swap out the rifle length quadrail for a carbine-length aluminum one. Any idea if that's possible?
This is one of few issues I have with the Tac .22. I know Mossberg says it will accept a variety of aftermarket products already available for AR style firearms, but I dont know how swapping out the forend would be possible.
Someone else on here was talking about coming up with a way to do it though, so maybe soon!
I think Mossberg is refering to the abundance of rails when it claims AR accessories will fit. I'm actually considering cutting the stock rails down to 3/4 their length. The only issue I foresee is keeping the 2 pieces held together at the end. I think clamping an accessory to that end of the rail (perhaps a sling mount on bottom, or flip-up backup sight on top) would keep it together just fine.